Firestone water-based adhesive is used to bond the EPDM to a flat timber substrate only. Do not allow adhesive to freeze.PreparationMake sure that all bonding surfaces are clean, dry and smooth. Areas must also be free of any sharp edges or loose and foreign materials, including oil, grease and other contaminants.ApplicationStir adhesive prior to application and use a roller to apply evenly onto the timber substrate. Membrane should be installed immediately and positioned whilst the adhesive is still wet. Open the membrane out as soon as possible to allow it to settle. On hot days, apply small sections of water-based glue and immediately cover with the membrane. This will prevent the glue from drying prematurely. Do not use in freezing conditions or if frost is forecast within 24 hours.
Rubber Roofing Supplies Northwest Limited t/a Rubber Roofing Supplies . Allrights reserved. | Registered in England & Wales 12312124 . VAT registration number 341758883
Website Design by Webfactory