Firestone Adhesives
Achieve the best possible result to your rubber roof installation and ensure your EPDM Rubber Roof lasts, it is always advisable to use the highest quality EPDM adhesive. We supply a range of Firestone adhesives, compatible with Firestone RubberCover membranes.
Firestone Water Based Adhesive
Firestone water-based adhesive is designed to be used to adhere EPDM membranes to a timber substrate. This adhesive should only be used on a clean, dry and smooth bonding surface that is free of sharp edges, oil and grease. Application Tips Use a roller to apply the adhesive evenly onto the timber substrate Install the membrane immediately after applying the adhesive The adhesive is available in 2.5 litres, 5 litres and 10 litres.
£42.50 exc VAT
Firestone Bonding Adhesive
Firestone Contact Adhesive has many uses including adhering EPDM membranes to upstand, masonry and vertical surfaces and as a deck adhesive on old concrete and asphalt. When applying to either upstands or decks, make sure the adhesive is touch dry before securely applying the membrane. If the membrane is applied when the adhesive is still wet, you may find bubbles start to appear under the membrane itself. A 2.3L tin of green contact adhesive contains between 7.5 and 10m2 of coverage.
£36.00 exc VAT
Firestone QuickPrime Plus 1ltr
Firestone QuickPrime Plus is a primer that is designed for use as an activator for QuickSeam detailing products and to effect waterproof seals. This primer is necessary to use a variety of Firestone products including Formflash, Cover tape, Corner flashing and Walkway pads. You must ensure the primer is touch dry before applying to surfaces or other products.
£23.68 exc VAT
