Termination Bar 3m
3m Length
Termination Bar is intended for attaching and sealing flashing terminations as outlined by Firestone Specifications and Details.
METHOD OF APPLICATION
Substrates must be free from dust, dirt, oil, water and other contaminants. Wall areas above Termination Bar must be waterproof. Install per Firestone Specifications and Details.
Install Firestone Water Block Seal behind top of flashing. Anchor bar through pre-punched holes at a rate to maintain a seal. Remove excess flashing material from above the Bar.
STORAGE
Store in unopened original containers protected from the weather.
Related EPDM Products
Firestone Bonding Adhesive
Firestone Contact Adhesive has many uses including adhering EPDM membranes to upstand, masonry and vertical surfaces and as a deck adhesive on old concrete and asphalt. When applying to either upstands or decks, make sure the adhesive is touch dry before securely applying the membrane. If the membrane is applied when the adhesive is still wet, you may find bubbles start to appear under the membrane itself. A 2.3L tin of green contact adhesive contains between 7.5 and 10m2 of coverage.
£36.00 exc VAT
Firestone QuickPrime Plus 1ltr
Firestone QuickPrime Plus is a primer that is designed for use as an activator for QuickSeam detailing products and to effect waterproof seals. This primer is necessary to use a variety of Firestone products including Formflash, Cover tape, Corner flashing and Walkway pads. You must ensure the primer is touch dry before applying to surfaces or other products.
£23.68 exc VAT
