Deck Adhesive / Waterbased Adhesive is more suited to wood and ply adhesion on the main area of the deck. The reasons why Waterbased / Deck is often used is because it is easy to lay, you can lay the EPDM straight onto it while it is still wet and it is also possible to correct mistakes shortly after the EPDM has been laid down up to 2-3 times if you find there is unwanted debris underneath due to it taking slightly longer than bonding to dryAreas For UseThis adhesive should be used on flat timber surfaces, not suitable for brickwork.Apply even coat to timber deck using a 9″ emulsion roller.Mate the two surfaces and follow with a brooming over the membrane to ensure proper bonding.Avoid globules and puddles allow to tack off before mating. For best results apply Permaroof Deck Adhesive to smooth, dry timber surface.Use only when temperatures will not fall below freezing at any time 24 hours after mating with EPDM.
Rubber Roofing Supplies Northwest Limited t/a Rubber Roofing Supplies . Allrights reserved. | Registered in England & Wales 12312124 . VAT registration number 341758883Registered Address: Rubber Roofing Suppliers NW, Unit12 Brook Mill, Complex, Branch Road, Lower Darwen,Blackburn, BB3 0PR
Website Design by Webfactory