Firestone Walkway Pad

£45.00 exc VAT
Qty

Firestone QuickSeam Walkway Pads are high quality rubber pads with QuickSeam Tape laminated to the bottom.

They are used to protect Firestone RubberCover EPDM membrane in areas of regular roof traffic, balconies or walkways.

Must be used with Firestone Quickprime Plus.

Dimensions - 750mm x 750mm

Related EPDM Products

6" Batten Cover Strip 1-15m

Quickseam Batten Coverstrip is a 6 inch semi-cured strip of EPDM laminated to Quickseam tape. General uses include sealing and covering membrane seams. As a rigid tape, it will not stretch around corners but is a durable solution with watertight properties. It is ideal for DIY roofing projects as it's easy to install and provides a high quality finish. For best results, must be used with Quickprime and surfaces must be clean and dry prior to application. Sold per metre and whole roll measures 30.5m.
£12.50 exc VAT Was £14.10

Firestone Bonding Adhesive

Firestone Contact Adhesive has many uses including adhering EPDM membranes to upstand, masonry and vertical surfaces and as a deck adhesive on old concrete and asphalt. When applying to either upstands or decks, make sure the adhesive is touch dry before securely applying the membrane. If the membrane is applied when the adhesive is still wet, you may find bubbles start to appear under the membrane itself. A 2.3L tin of green contact adhesive contains between 7.5 and 10m2 of coverage.
£36.00 exc VAT

Firestone Bonding Adhesive Spray Aerosol for EPDM - 750ml

Firestone 750ml spray contact adhesive is used for adhering EPDM to vertical surfaces and can be used on bricks, wood and many other substrates. Installation Tip Shake thoroughly prior to use. Apply a thin even coat to the membrane and substrate. 750ml covers approx 1 - 1.5m2.
£15.28 exc VAT

Firestone QuickPrime Plus 1ltr

Firestone QuickPrime Plus is a primer that is designed for use as an activator for QuickSeam detailing products and to effect waterproof seals. This primer is necessary to use a variety of Firestone products including Formflash, Cover tape, Corner flashing and Walkway pads. You must ensure the primer is touch dry before applying to surfaces or other products.
£23.68 exc VAT

Firestone QuickSeam Pipe Boot Seal

The Firestone QuickSeam Pipe Boot Seal is designed for integrating pipework up to a diameter of 150mm. This type of seal is a fire resistant, watertight and durable roofing solution. For quick and easy installation, the pipe boot has a self-adhesive and it is recommended to slide the pipework through post-installation. QuickPrime is required with this pipe boot.
£50.00 exc VAT