Adhesive Stirrer

£12.00 exc VAT
Qty

Adhesive Stirrer used to mix water based adhesive prior to use to give best results.

Related EPDM Products

Firestone Bonding Adhesive

Firestone Bonding Adhesive

Firestone Contact Adhesive has many uses including adhering EPDM membranes to upstand, masonry and vertical surfaces and as a deck adhesive on old concrete and asphalt. When applying to either upstands or decks, make sure the adhesive is touch dry before securely applying the membrane. If the membrane is applied when the adhesive is still wet, you may find bubbles start to appear under the membrane itself. A 2.3L tin of green contact adhesive contains between 7.5 and 10m2 of coverage.
£36.00 exc VAT
View
Firestone Bonding Adhesive Spray Aerosol for EPDM - 750ml

Firestone Bonding Adhesive Spray Aerosol for EPDM - 750ml

Firestone 750ml spray contact adhesive is used for adhering EPDM to vertical surfaces and can be used on bricks, wood and many other substrates. Installation Tip Shake thoroughly prior to use. Apply a thin even coat to the membrane and substrate. 750ml covers approx 1 - 1.5m2.
£15.28 exc VAT
View
Firestone Water Based Adhesive

Firestone Water Based Adhesive

Firestone water-based adhesive is designed to be used to adhere EPDM membranes to a timber substrate. This adhesive should only be used on a clean, dry and smooth bonding surface that is free of sharp edges, oil and grease. Application Tips Use a roller to apply the adhesive evenly onto the timber substrate Install the membrane immediately after applying the adhesive The adhesive is available in 2.5 litres, 5 litres and 10 litres.
£42.50 exc VAT
View
Water Based Decking Adhesive

Water Based Decking Adhesive

More Sizes Available
£30.12 exc VAT
View